2578 retaining kit  Cord retaining strain relief snap-in mounting

Series: 2578 retaining kit

Cord retaining strain relief snap-in mounting

Free Sample Request

16 Variants


Connectors (Inlets/Outlets)

C8
Connector Logo
70° C

Description

  • Screw-on from front side
  • Protection against accidental disconnection of power supply cord

Ratings IEC

Ratings IEC


The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

2.5 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL


The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

7 A / 125 VAC; 60 Hz

IP-Protection

IP-Protection


The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects.
Details about IP protection degree can be looked up in the general product information
IP-Protection

from front side IP20 acc. to IEC 60529

Protection against electric shock

Protection Class


Class I: with ground; Class II: without ground

Detailed information relating to protection class can also be found in the general product information
Protection against electric shock

Suitable for appliances with protection class II acc. to IEC 61140

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.


Product standards

Product standards that are referenced

Organization Design Standard Description
Partners IEC_Certification_Body Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Partners UL_Certification_Body Designed according to UL 498 Standard for Attachment Plugs and Receptacles
Partners CSA_Certification_Body Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices


Application standards

Application standards where the product can be used

Organization Design Standard Description
Partners IEC_Certification_Body Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video, information technology and office equipment.


Compliances

The product complies with following Guide Lines

Identification Details Initiator Description
Approval marks CE Selbsteklaration SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
Environment_Safety RoHS_Logo_color_CMYK_tif SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
Environment_Safety China_RoHS_50_non_konform_eps SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
Environment_Safety REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.

020070010000002317
LOADING...

Dimensions [mm]

Retaining Kit


Assembly Instructions

1) Retainer
2) Appliance Inlet
3) Panel
4) Screws (M3)
5) Washer
6) Nut (M3)
Screws, nuts and washers are not included in the kit

Short Table of Variants 2578 retaining kit Open complete table 2578 retaining kit

Order Number

Variant Details


The link on the respective order number refers to a separat tab with specific detailed information .
This assures better readable information of the selected product.
Change to the tab All Products in order to show details of another variant.
This approach offers to use generic alias link to the product details:
www.schurter.xx/art/ [Order Number]
where the following variables are used:
- xx is the country specific domain
- [Order Number]

Designation Appliance Inlet Cable A=Most Popular

A=Most Popular


Most popular products have the following customer benefits:
- previously ordered by multiple customers
- generally in stock for immediate delivery
- early adoption or mature life cycle
Contact us for availability on other product variants, lead-times vary:
Contact-Form Availability for all products can be searched real-time. Enter part number and required quantity:
Stock Check SCHURTER

Free Sample

Free Sample


Please ask for free sample in order to check if the products meets your requirement for your application. Send your delivery adress and your specific requirements.

Distributor Stock Check

Distributor Stock Check


The following links refers to the inquiry form for distributors stock information of the selected products. It allows checking for the available amount and optionally to place an order at your selected partner.
The stock availability at the distributors may also be called up separately and the desired product manually entered.
Stock Check Distributor

...
 
2578 Retaining Kit US 2m 6160.0124 ...
2578 Retaining Kit US 4m 6160.0125 ...
2578 Retaining Kit EU 2m 6160.0126 ...
2578 Retaining Kit EU 4m 6160.0127 ...
2578 Retaining Kit US 2m 6160.0128 ...
2578 Retaining Kit US 4m 6160.0129 ...
2578 Retaining Kit EU 2m 6160.0130 ...
2578 Retaining Kit EU 4m 6160.0131 ...
2578 Retaining Kit US 2m 6160.0132 ...
2578 Retaining Kit US 4m 6160.0133 ...
2578 Retaining Kit EU 2m 6160.0134 ...
2578 Retaining Kit EU 4m 6160.0135 ...
2578 Retaining Kit US 2m 6160.0136 ...
2578 Retaining Kit US 4m 6160.0137 ...
2578 Retaining Kit EU 2m 6160.0138 ...
2578 Retaining Kit EU 4m 6160.0139 ...
Other appliance inlet on request

Packaging unit

020070010000002317
LOADING...
Alternative: version for screw mounting (1)

[Swipe to the left and right for more options]

Component 1: Inlet (1)

[Swipe to the left and right for more options]

Component 2: (1)

[Swipe to the left and right for more options]


   
cns prod 通过更改目录版本(桌面 <> 移动),系统将重置所选的过滤器